Network Printing7-38
8 Specify the folder containing the driver for a 64-bit operating system.
A dialog box appears, requesting the location of the setup information file.
9 Click [Browse], and then select the setup information file (ntprint.inf) on
the client computer mapped as a network drive.
" This setting is available for only PostScript driver.
– Specify the file at the following path.
z:\Windows\System32\DriverStore\FileRepository\ntprint.inf_xxx
– In the path mentioned above, “z” indicates the mapped network
drive. In addition, the characters indicated by “_xxx” at the end
may differ depending on the driver version.
– Depending on the client computer being used, the setup informa-
tion file may be stored in a different location. If there is a folder
named “amd64” at the same level as “ntprint.inf”, specify the setup
information file for a 64-bit operating system located within that
folder. In addition, if the driver for a 32-bit operating system is to be
installed, specify the setup information file in the folder named
“i386” at the same level as “ntprint.inf”.
10 Click [Open].
The installation begins.
11 After the installation is completed, click [Close].
This completes the installation of the driver for a 64-bit operating system
onto the print server (32 bits).
To Next Page
Loading...
Need help?
General
