Configuring the Printer8-60
[FeliCa (SSFC) Settings]
" Specify FeliCa (SSFC) settings. This menu item appears only if the
loadable driver supports FeliCa (SSFC).
" When a setting on this page is changed, the card information saved on
the printer is erased.
The [Security] - [Authentication Device Settings] - [FeliCa (SSFC) Settings]
page allows you to configure the following items.
Item Description
[Room Code] Specify the room number.
Range: 0 to 65535
Default: [0]
[Floor Code] Specify the floor number.
Range: 0 to 65535
Default: [0]
[Building Code] Specify the building number.
Range: 0 to 65535
Default: [0]
To Next Page
Loading...
Need help?
General
