Muratec MFX-C3035 - Page 401

Configuring the Printer8-134
[Calibra-
tion Set-
tings]
[Tone Calibration] If [On] is indicated, image adjustments are
applied.
If [Off] is indicated, image adjustments are
not applied.
Choices: [On], [Off]
Default: [On]
Configuration Menu Equivalent:
[Admin Settings] - [Print Settings] -
[Quality Settings] - [Gradation
Adjust] - [Tone Calibration]
[Cyan]/[Magenta]/
[Yellow]/[Black
Density] (High-
light)
Specifies the density of the highlight color.
Choices: [-3], [-2], [-1], [0], [+1], [+2], [+3]
Default: [0]
Configuration Menu Equivalent:
[Admin Settings] - [Print Settings] -
[Quality Settings] - [Gradation
Adjust] - [CMYK Density] - [Cyan]/
[Magenta]/[Yellow]/[Black] -
[Highlight]
[Cyan]/[Magenta]/
[Yellow]/[Black
Density] (Middle)
Specifies the density of the middle color.
Choices: [-3], [-2], [-1], [0], [+1], [+2], [+3]
Default: [0]
Configuration Menu Equivalent:
[Admin Settings] - [Print Settings] -
[Quality Settings] - [Gradation
Adjust] - [CMYK Density] - [Cyan]/
[Magenta]/[Yellow]/[Black] -
[Middle]
[Cyan]/[Magenta]/
[Yellow]/[Black
Density]
(Shadow)
Specifies the density of the shadow color.
Choices: [-3], [-2], [-1], [0], [+1], [+2], [+3]
Default: [0]
Configuration Menu Equivalent:
[Admin Settings] - [Print Settings] -
[Quality Settings] - [Gradation
Adjust] - [CMYK Density] - [Cyan]/
[Magenta]/[Yellow]/[Black] -
[Shadow]
Item Description