Configuring the Printer8-156
[Destination Information] Specify detailed destination information.
[Host Address] Type in the host name, IPv4 address or
IPv6 address of the destination computer.
Format: *.*.*.* (The asterisks (*) indicate
numbers between 0 and 255.)
Host name must be specified in upper-
case.
To perform SMB transmission using an
IPv6 address, set the Direct Hosting to
[Enable]. For details, refer to “[Direct
Hosting Settings]” on page 8-219.
[File Path] Specify the destination directory. (up to
255 bytes)
" If the directory name is different
from the share name, specify the
share name.
[User ID] Type in the user ID for logging on to the
destination computer. (up to 127 bytes)
[Password] Type in the password for logging on to the
destination computer. (up to 127 bytes)
Item Description
To Next Page
Loading...
Need help?
General
