Configuring the Printer8-184
[IPv4 Settings]
The [Network] - [TCP/IP Settings] - [IPv4 Settings] page allows you to config-
ure the following items. For more information on these TCP/IP settings, refer
to chapter 7, "Network Printing"
[SLP] Select whether or not SLP is used.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration menu equivalent:
[Admin Settings] - [Ethernet] - [TCP/IP] -
[SLP]
[LLMNR] Select whether or not LLMNR is used.
Choices: [Enable], [Disable]
Default: [Enable]
Item Description
To Next Page
Loading...
