Configuring the Printer8-210
[FTP TX Settings]
The [Network] - [FTP Settings] - [FTP TX Settings] page allows you to config-
ure the following items.
Item Description
[FTP TX] If [Enable] is selected, FTP transmission is enabled.
Choices: [Enable], [Disable]
Default: [Enable]
[Connection Timeout] Select the length of time (in seconds) until the con-
nection with the FTP server times out.
Range: 5 to 300 (seconds)
Default: [60]
[Proxy Server Address] Specify the address when using a proxy server.
An IPv4 address, IPv6 address or FQDN (fully qual-
ified domain name) can be specified.
Range: Up to 64 characters
Default: [0.0.0.0]
To Next Page
Loading...
