6 Common Functions
92 IDA-3106 Narda
You can change the step size for changing Fcent using the Step Size
setting. The acceleration function also increases the step size when the
rotary control knob is turned rapidly.
To set the step size:
The Fcent softkey is displayed.
1. Press the Fcent softkey.
The Step Size softkey is displayed.
2. Press the Step Size softkey until Fix appears.
The Set Fstep softkey is displayed.
3. Press the Set Fstep softkey and select the step size using the rotary
control knob or enter it using the number keys.
4. Press OK to apply the value.
NOTE: You can change individual digits in the center frequency value when the
entry window is open by using the arrow keys to select the digit you
want to change and then using the rotary control knob to set the desired
value. Press the OK key to set the new value.
Table 23: Description of Step Size softkey
Softkey Description
Step Size: Auto
(default)
A suitable value for the step size is selected automatically
depending on the actual settings of Fspan or CBW.
Step Size: Fix You can set the step size using the Set Fstep parameter
To Next Page
Loading...
