NARDA IDA - Common Functions

Narda IDA-3106 89
6 Common Functions
This chapter describes the functions that are common to more than one
operating mode. These functions are then indicated in the descriptions of
the individual operating modes by a cross reference to the relevant section
of this chapter.
6.1 Notes on this chapter (page 90)
6.2 Resetting all device settings (page 90)
6.3 Setting the center frequency (Fcent) (page 91)
6.4 Setting the bandwidth (RBW / CBW) (page 94)
6.5 Setting the video bandwidth (VBW) (page 96)
6.6 Setting the reference level (Reference Level) (page 97)
6.7 Selecting the trace type (Trace) (page 101)
6.8 Changing the displayed units (Unit) (page 103)
6.9 Adjusting the Y axis (Y-Scale) (page 105)
6.10 The Marker function (page 106)
6.11 Using the Magnifier function (page 114)
6.12 Using Multi-Channel Tables (page 117)
6.13 Demodulating signals (Audio) (page 118)
6.14 Setting the noise threshold (Noise Thresh.) (page 123)
6.15 Measuring with multiple axis antennas (Axis) (page 124)
6.16 Changing the operating mode (page 125)