NARDA IDA - Fundamental Operating Steps

4 Operation and Basic Settings
50 IDA-3106 Narda
To change the screen arrangement:
 You have selected an operating mode.
1. Press the Display softkey.
2. Press the Screen Arrangement softkey.
3. Use the rotary control knob and softkeys to select the settings you
want and then press the OK key to implement the changes.
4.5 Fundamental operating steps
The operating steps described in this section are repeated in every menu
and function. They are therefore described only once here and knowledge
of these basic steps is assumed in all subsequent descriptions of the
operating modes.
4.5.1 Navigating in the menus
The operating modes and functions of the IDA-3106 are arranged in
hierarchical menu levels. The diagram below (see Figure 12 on page 50)
shows this arrangement using the main menu and some of the functions in
mode as examples.
To navigate in the menus:
• To move down one level: Press the appropriate Softkey.
• To move up one level: Press the ESC key.
• To return to the measurement or the main menu: Press the MENU key.
Figure 12:Examples showing how the menus and functions are arranged.
Multi-Ch. Table
Softkey
ESC
MenuSoftkey
Settings
Softkey
Menu
Distribution
Softkey
ESC
ESCSoftkey
Evaluation