4.5 Fundamental operating steps
Narda IDA-3106 51
4.5.2 Forwards / Backwards
When you are changing setting parameters, two softkeys labeled Forwards
and Backwards are provided to allow you to move forwards or backwards
through the setting parameter history within the active operating mode.
Changes in the following setting parameters will be taken into account
depending on the selected operating mode:
To move backwards or forwards:
Press the Extras softkey, then press the Backwards or Forwards
softkey.
The Forwards softkey is not shown until you have pressed the
Backwards softkey at least once.
Mode Parameters
Direction Finding Fcent, CBW
Spectrum Fcent, Fspan, RBW
Level Meter Fcent, CBW
Time Domain (Scope) Fcent, CBW, Time Span, Time Resolution
I⁄Q Analyzer Fcent, CBW, Time Span
Multi-Channel Power Function not available
To Next Page
Loading...
