9 Level Meter Mode
176 IDA-3106 Narda
9.1 About Level Meter mode
Level Meter mode allows you to make selective measurements at a defined
frequency (Fcent) e.g. for monitoring the field strength of a communications
channel. The channel bandwidth (CBW) for this can be set in the range 100
Hz to 32 MHz (zero span mode). Steep filters enable precise separation of
adjacent channels. The Peak detector values (for brief pulsed signals) and
RMS detector values (for variable signals) are displayed simultaneously.
One advantage of Level Meter mode is that the measurement is in real time
and there are no time gaps.
To Next Page
Loading...
