NARDA IDA - Controls

4 Operation and Basic Settings
42 IDA-3106 Narda
4.1 Controls
The following controls are provided for operating the IDA-3106:
• Rotary control knob
• Hardware keys (referred to as keys in this manual)
• Software keys (referred to as softkeys in this manual)
• Button on the antenna handle
4.1.1 Rotary control knob and keys
Element Function / Explanation
Quickly sets the frequency (Fcent), selects
functions and values, navigates and zooms on
maps, moves limits and markers, etc.
Moves left or right in entry boxes, selects items
from lists, (left = down, right = up), selects
bearings, sets the demodulation volume
Confirms changed settings, selects functions,
etc.
Cancels the current operating step (changes in
values are rejected), moves back to a higher
menu level
1. From the top menu level in an operating
mode: Switches to the Main menu
2. From a sub-menu: Switches to the top menu
level of the operating mode
Freezes the display; the measurement
continues. Press again to update the display to
show the actual values again.
Saves data to the data logger
For entering numbers and the decimal point
Hold down to switch the device on / off
Press briefly to switch stealth mode on / off