NARDA IDA - Page 182

8 Spectrum Analysis Mode
174 IDA-3106 Narda
Determining two different times and frequencies:
 Delta Marker = Delta Time & Frequency,
Active Marker = A,
Navigation = Frequency
1. Press the Hold key to freeze the display.
2. Set Marker A to the first frequency.
3. Select Navigation= Time.
4. Set Marker A to the desired time.
5. Select Active Marker = B and Navigation = Frequency.
6. Set Marker B to the second frequency.
7. Select Navigation= Time.
8. Set Marker B to the desired time.
 The associated values are displayed in the Marker bar.
8.5.2 Setting a threshold (Peak Threshold)
 See Changing the marker evaluation settings (Marker Settings)
on page 113.
8.5.3 Setting a minimum signal peak excursion
(Peak Excursion)
 See Changing the marker evaluation settings (Marker Settings)
on page 113.