17.4 Antenna handle and antennas
Narda IDA-3106 259
17.4.2 Directional Antenna 1 (3100/11)
17.4.3 Directional Antenna 2 (3100/12)
17.4.4 Directional Antenna 3 (3100/13)
RF connector to basic unit N-connector, male, 50
RF connector to Narda
directional antennas
BMA 50 , (female on handle side)
Antenna connectivity Narda antennas can be plugged in with horizontal and vertical
polarization. Type of antenna and polarization detected
automatically and transferred to basic unit.
Power supply From basic unit
Mounting Connecting thread on the underside of the handle for tripod
mounting.
Frequency range 20 MHz to 250 MHz
Typical antenna factor correction is applied automatically when
used in conjunction with the IDA basic unit and Narda Active
Antenna Handle
Antenna type Loop antenna
Antenna factor 21 dB (1/m) typical @ 200 MHz
Frequency range 200 MHz to 500 MHz
Typical antenna factor correction is applied automatically when
used in conjunction with the IDA basic unit and Narda Active
Antenna Handle
Antenna type Dipole antenna
Antenna factor 21 dB (1/m) typical @ 350 MHz
Frequency range 400 MHz to 6 GHz
Typical antenna factor correction is applied automatically when
used in conjunction with the IDA basic unit and Narda Active
Antenna Handle
Antenna type Log-periodic antenna
Antenna factor 18.5 dB (1/m) typical @ 500 MHz
To Next Page
Loading...
