Native Instruments MASCHINE MK3 - Setup Examples; Connecting Active Monitor Speakers

2.3 Setup Examples
In this section, you will learn how to connect the MASCHINE controller in various setup sce-
narios. Although we cannot cover all imaginable setups here, the examples are general enough
to apply the information to most situations.
2.3.1 Connecting Active Monitor Speakers
This example shows an all-in-one production system setup in which your active monitor speak-
ers are directly plugged into your MASCHINE controller’s main outputs.
MASCHINE setup with active monitors.
To use active speakers (self-powered speakers with a built-in amplifier) with your MASCHINE
controller:
Setting Up MASCHINE
Setup Examples
MASCHINE - Getting Started - 23