Native Instruments MASCHINE MK3 Getting Started

→ The Plug-in menu is automatically closed and the Kick Plug-in is now loaded in place of
the Sampler, ready to be tweaked:
As in the Browser (see section ↑4.2.1, Selecting Another Snare Sample), the 4-D encoder
proves to be extremely handy for navigating the Plug-ins loaded in your Sounds and loading
new ones.
You can also open or close the Plug-in menu by pressing SHIFT + BROWSER (+Plug-
In).
4.2.3 Adjusting Volume, Swing and Tempo
After selecting the right Samples for your drum kit, you might need to adjust their levels. MA-
SCHINE holds a powerful sampler that allows you to fine-tune many settings for each generat-
ed sound. Without entering into too many details yet, look at a quick way to adjust the volume
level and swing for each Sound in your Group.
4.2.3.1 Adjusting Volume, Swing and Tempo in the MASCHINE Software
Adjusting Volume
To adjust the various volume levels in the software, the following controls are at your disposal:
►
To adjust the overall output level, click and drag the Master Volume slider located on the
right part of the Header, at the top of the window.
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE - Getting Started - 64

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs