Native Instruments MASCHINE MK3 Getting Started

Navigate mode: page navigation.
Use Buttons 5–8 above the right display along with the pads to select the desired parameter
page:
Action Shortcut
Select Plug-in (from the Plug-in list) /
Select Channel properties (Input, Output, Groove or Macro)
Button 5 and 6
Select Page Bank Button 7 and 8
Select parameter page Pads
►
To exit page navigation, press the lit Button 2 (PAGE NAV).
12.2 MASCHINE Project Overview
A MASCHINE Project contains all the information stored with a MASCHINE-produced piece of
music.
▪ The Project references all the sound content: the instruments, sounds and samples, and all
the effects that you apply to them.
▪ The Project also contains the arrangement of your song: how Patterns are built from events
which trigger Sounds, and how they are arranged into a song structure using Scenes and
Sections.
The following section will explain these two aspects in detail.
Quick Reference
MASCHINE Project Overview
MASCHINE - Getting Started - 182

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs