Native Instruments MASCHINE MK3 Getting Started

In this tutorial we will sample some audio and add a chopped vocal to add to our track. Before
we begin we must setup our external sound source to record the input from our microphone.
This chapter is a short introduction to sampling. We will exclusively use the software,
but most of these tasks can be done from your controller as well. Please refer to the
Manual for detailed information.
11.4.1 How to Sample
1. First choose an empty Sound slot to record into by clicking its name.
2. Now click the Sample Editor button right underneath the Keyboard View button, at the
left of the Pattern Editor:
The Pattern Editor switches to the Sampling tabs:
Using Advanced Features
Sampling
MASCHINE - Getting Started - 171

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs