Native Instruments MASCHINE MK3 Getting Started

2. Plug the 1/4" TRS jack of your headphones into the PHONES socket nearby.
3. Start the playback of a Project in MASCHINE or an audio file on your computer.
4. Gradually turn the PHONES VOLUME knob on the MASCHINE controller until you reach a
comfortable listening level.
The headphones output of your MASCHINE controller is an additional stereo output, dis-
tinct from the main output pair, and perfectly tailored for the Cue channel of MA-
SCHINE. You cannot use it to monitor the main outputs in your headphones. For more
details, please read the following Knowledge Base article on the Native Instruments
website:
https://support.native-instruments.com/hc/en-us/articles/115005070825-Important-
Notes-on-MASCHINE-MK3-s-Audio-Interface.
2.3.3 MASCHINE in a Recording Setup
The following instructions will assist you in using the MASCHINE controller in a recording sit-
uation for capturing audio to MASCHINE — for example, for recording samples or process a
live input during a performance.
Setting Up MASCHINE
Setup Examples
MASCHINE - Getting Started - 26

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs