Native Instruments MASCHINE MK3 Getting Started

→
Your modulation gets recorded now. On the next loop, the parameter changes will be re-
produced.
There is also another way to record modulation from your controller: the step sequencer.
More on this in ↑8, Creating Beats with the Step Sequencer!
Delete the Recorded Modulation
If you want to discard the modulation you just recorded and try again, do the following:
►
Press and hold ERASE, and touch the same Knob 1–8 to delete the modulation for the
corresponding parameter.
7.3.2 Editing Modulation
You edit any recorded modulation in the software. For this, the Control Lane is at your disposal
at the bottom of the Pattern Editor:
The Control Lane displays the changes you recorded for each automated parameter.
To edit the modulation:
1. Click the desired parameter in the list of automated parameters (on the left) to select it.
2. Drag the modulation points vertically in the Control Lane.
For more information on editing modulation and automation, please refer to the Manual.
Applying Effects
Modulating Effect Parameters
MASCHINE - Getting Started - 119

Native Instruments MASCHINE MK3 Specifications

General

Brand	Native Instruments
Model	MASCHINE MK3
Category	Recording Equipment
Language	English