Native Instruments MASCHINE MK3 - 11 Using Advanced Features; Changing the Sound, Group, and Master Channel Properties

11 Using Advanced Features
This chapter quickly presents a brief introduction to another four powerful features of MA-
SCHINE:
▪ The Sound, Group, and Master Channel properties
▪ Advanced routing
▪ Sampling
▪ Mix view
For detailed information on these features please refer to the MASCHINE Manual.
11.1 Changing the Sound, Group, and Master Channel Properties
In a previous tutorial, we learned how to adjust the Volume and Swing of the Project — see
section ↑4.2.3, Adjusting Volume, Swing and Tempo for a reminder. In fact, Volume and
Swing are only two of the numerous Channel properties available for each channel, i.e. for each
Sound, for each Group and for the Master channel. The Channel properties are global configu-
ration settings for that particular channel. Notably, they are independent of which Plug-ins are
loaded in the channel.
In the software, after clicking the Channel icon (showing a little rotary knob) in the upper left
corner of the Control area, you see four buttons at the bottom left:
The Channel Property selector in the Control area.
Using Advanced Features
Changing the Sound, Group, and Master Channel Properties
MASCHINE - Getting Started - 153