NCR 7454 - Page 104

3-12 Chapter 3: Setup
Disabled
CC00-CDFF
CE00-CFFF
D000-D1FF
MSR Address
This option is used to select the memory address range used by the
Magnetic Stripe Reader.
1. Move the cursor to the MSR Address option.
2. Press Enter and then select the desired setting from the drop-down
menu.
Multiple ROM Menu
Move the cursor to the Multiple ROM Menu option and press Enter.
This options on this menu are used to load/unload specific ROMs the
next time the system is started.
System Time: [12:34:00] Item Specific Help
System Date: [02/29/1997]
Multiple ROM Menu Item Specific Help
On-board Intel Lan (30 kB) [Enabled]
Parallel CD-ROM Boot (8 kB) [Enabled]
Lucent WaveLAN ROM (20 kB) [Disabled]
PXE Base ROM (28 kB) [Disabled]
Selectable ROM 5 [Disabled]
Selectable ROM 6 [Disabled]
Selectable ROM 7 [Disabled]
Selectable ROM 8 [Disabled]
Selectable ROM 9 [Disabled]
Selectable ROM 10 [Disabled]
Selectable ROM 11 [Disabled]
Selectable ROM 13 [Disabled]
Selectable ROM 14 [Disabled]
Selectable ROM 15 [Disabled]
Exit Submenu
PhoenixBIOS Setup Utility