NEC SL100 - Page 31

Item No. Item Input Data Default
04 Line Length Selection 0=0feet~133feet
1 = 133 feet ~ 266 feet
2 = 266 feet ~ 399 feet
3 = 399 feet ~ 533 feet
4 = 533 feet ~ 655 feet
0
05 T1 Clock Source 0 = Internal
1 = External
1
06 Number of Ports 0 = Auto
1=4Ports
2=8Ports
3=12Ports
4=16Ports
5=20Ports
0
For E1 PKG Setup
Physical Port Number 01 ~ 30
Item No. Item Input Data Default
01 Logical Port Number 1 ~ 126 0
02 Number of channels 0~30 0
04 E1 Clock Source 0 = Internal
1 = External
1
05 Transmit Pulse Mask 0=01to133feet
1 = 133 to 266 feet
2 = 266 to 399 feet
3 = 399 to 533 feet
4 = 533 to 655 feet
0
06 Frame Type 0 = Double Frame (no CRC-4)
1 = Multiframe Structure (CRC-4)
0
07 Line Coding 0 = AMI
1 = HDB3
1
10 Receive Input Threshold 0 = 0.91/1.70 V
1 = 0.74/0.84 V
2 = 0.59/0.84 V
3 = 0.42/0.45 V
4 = 0.32/0.45 V
5 = 0.21/0.20 V
6 = 0.16/0.10 V
7 = 0.10/not defined
2
For VoIPDB PKG Setup
Physical Port Number 01 ~ 16
Item No. Item Input Data Default
01 Trunk Logical Port Number 1 ~ 126 0
02 Trunk Type 0=H.323
1=SIP
1
Conditions
• When changing a defined terminal type, first set the type to 0 and then plug the new device in to
have the system automatically define it, or redefine the type manually.
• The system must have a unit installed to view/change the options for that type of unit.
ISSUE 1.1 SL1000
Program
10
Programming Manual 2-9