NEC SL1000 - Page 746

Program Num-
ber
Program Name Default Note
13-04-04 Destination Number
Internal Dial
Up to 36 digits
Incoming ring Group
0-25
Remote Monitor
Dial Up to 4 digits (SL1000)
Dial Up to 8 digits (SL1100)
No Setting
13-04-05 Incoming ring pattern
0 = Normal pattern
1-4 = Tone pattern (1-4)
5-9 = Scale pattern (1-5 )
0
13-04-06 CR/PR feature
0 = Disable
1 = Enable
0
13-04-07 VRS Incoming Message Number
(0 ~ 100)
0
15-02-55 VRS Incoming Message Number
(0 ~ 100)
0
11-10-43 VRS Incoming Message Setting 878
Operation
To Set the Incoming Voice/Melody ringing from the Call History Mode (SL1000)
1. Below shows the Call ID History list.
1-19 16:08
01: 123
2. Press Down on a Navigation Key.
Store? Yes:1
01: 123
3. Press 1 (YES).
ABB:1 DND:2
RI:3
4. Press 3 (RI) (PRG13-04-01).
It will search and see if the CallerID already exist in ABB or not. If it already does exist it.
ABB0001
123
SL1000/SL1100 ISSUE 2.0
1-736
Voice/Melody Ringing by VM
V