Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-04-01 Virtual Extension Numbering - Extension Num-
ber
Dial (Up to 8 digits) All Virtual Extension
Port = No Setting
15-01-01 Basic Extension Data Setup - Extension Name No Setting
15-01-05 Basic Extension Data Setup - Restriction for Out-
going Disable on Incoming Line
0 = Supervise dial detection
1 = Not supervise dial detection
0
15-02-07 Multiline Telephone Basic Data Setup - Automat-
ic Hold for CO Lines
0 = Hold
1 = Disconnect (Cut)
1
15-02-21 Multiline Telephone Basic Data Setup - Virtual
Extension Access Mode (when idle Virtual Ex-
tension key pressed)
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
2
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
15-08-01 Incoming Virtual Extension Ring Tone Setup - In-
coming Ring Pattern
0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = Melody4 (2W Digital/IP Multi-
line Terminal)
0
15-09-01 Virtual Extension Ring Assignment - Ringing 0 = No Ringing
1 = Ring
0
15-10-01 Incoming Virtual Extension Ring Tone Order Set-
up
0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = Melody4 (2W Digital/IP Multi-
line Terminal)
Priority order:
1 = 0 (Tone Pattern 1)
2 = 1 (Tone Pattern 2)
3 = 2 (Tone Pattern 3)
4 = 3 (Tone Pattern 4)
15-11-01 Virtual Extension Delayed Ring Assignment -
Ringing
0 = Immediate Ring
1 = Delayed Ring
0
15-18-01 Virtual Extension Key Enhanced Options - Virtu-
al Extension Key Operation Mode
0 = Release
1 = Land on the key
1
15-18-02 Virtual Extension Key Enhanced Options - Dis-
play mode when placing a call on Virtual Exten-
sion Key
0 = Secondary Extension Name
1 = Actual Station Name
1
20-04-03 System Options for Virtual Extensions - Call
Coverage Delay Interval
0 ~ 64800 seconds 10
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
ISSUE 1.0 SL2100
Features and Specifications Manual 1-103
C
To Next Page
Loading...
