Feature Name Standard SIP Comments Note
User Programming Ability
Virtual Extensions No Limited user customization available.
Voice Mail Integration (Analog) Yes
Voice Call & Signal Switching Yes Can only send voice/signal switch
Voice Over No
Voice Response System (VRS) -
Call Forwarding – Park and Page
Yes
Volume Controls Yes Volume control is a function of the client device.
Out of Range Notification
• When the out of range timer (Program 24-02-15) expires, CFW is performed when Program
24-09-01 is set to 2-5 and the dial is set to the suitable place of Program 24-09-02~24-09-05. If
CFW is not set, the calling terminal hears a Lock-out tone shown in Table 1-39 Tones when calling
the SIP terminal in out of range on page 1-499 and the following Out of Range notice shown in
Figure 1-24 Example of LCD indication for out of range on page 1-499 is displayed on the
originators LCD.
Table 1-39 Tones when calling the SIP terminal in out of range
SIP terminal State
Out of Range or Power Off Busy (Speaking)
Lock-out Tone
(PRG80-01 Service Tone No.16)
Busy Tone
(PRG80-01 Service Tone No.6)
1-26 MON 12:00 PM
SIP OUT OF RANGE
InPg ExPg P/U ↓
Figure 1-24 Example of LCD indication for out of range
ISSUE 1.0 SL2100
Features and Specifications Manual 1-499
I
To Next Page
Loading...
