Tone Override
Description
The Multiline Terminal user that calls a busy station and receives a call waiting tone can generate a
Tone Override that is heard by the originator and busy station. The busy station user can place the
existing call on hold to answer the Override.
Conditions
• One Tone Override at a time can be received at a Multiline Terminal.
• Tone Override can be accomplished only after receiving a BUSY tone.
• Tone Override originate is allowed from a Single Line Terminal until the PBR times out.
• Virtual Extensions do not support Tone Override.
Default Settings
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Call Waiting/Camp-On
Data Line Security
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-03 Service Code Setup (for Service Access) - Over-
ride (Off-Hook Signaling)
0~9,
, # Maximum of 8 digit 709
11-16-04 Single Digit Service Code Setup - Intercom Off-
Hook Signaling
0~9,
, # Maximum of 1 digit
SL2100 ISSUE 1.0
1-830
Tone Override
T
To Next Page
Loading...
