NEC SL2100 - PC Programming; Figure 1-34 PC Programming Overview; Figure 1-35 Pcpro Connection Dialog

PC Programming
Description
The SL2100 has three different methods for programming. The first is via the Telephone, the second is
by PCPro and third by WebPro.
PCPro is a Microsoft Windows based application. It allows the technician/system administrator to
download a database from the system, make changes, and then upload.
The WebPro application is a browser base. It allows the technician/end user to make a change to the
system/terminal. No special installation program is required.
The following browsers are supported:
• Internet Explorer 11 or higher
• Chrome 52 or higher
• Mozilla Firefox 42 or later
An overview of the three programming applications is shown below.
Chassis
WebPro
(IP)
PCPro
(IP)
Telephone
PCPro
(Modem)
Figure 1-34 PC Programming Overview
Connecting
As can be seen in Figure 1-34 PC Programming Overview on page 1-696, three connection types are
available to PCPro/WebPro.
PCPro, user can connect directly or remotely using a modem/LAN. A connection with the system is
made via the Connection Dialog in the application. (Refer to Figure 1-35 PCPro Connection Dialog on
page 1-697.)
SL2100
ISSUE 1.0
1-696
PC Programming
P