NEC SL2100 - TAPI Compatibility; Table 1-64 TAPI Commands

TAPI Compatibility
Description
The system has Telephony Applications Programming Interface (TAPI) compatibility that provides:
• Reduced TAPI Feature Set (see the Supported TAPI Commands chart below)
• Caller ID data to the PC for data base lookups and screen pops (see the Caller ID Data chart below)
• Telephone control (Off-Hook, On-Hook and dialing)
The 1st-Party TAPI Ethernet Driver provides an interface that allows the user personalized control of
the telephone system from a desktop or laptop PC when used in conjunction with a TAPI-compliant
application. The telephone system and PC are connected by installing TAPI Drivers, allowing the PC
user to access sophisticated communications services via the telephone lines.
Conditions
• The 3rd Party CTI driver requires the 3rd Party CTI Client license 0112.
• The 1st Party CTI driver does not require any additional license.
• Caller ID and Call status are available from the TAPI interface functions.
• Only one 3rd-Party CTI connection to the SL2100 is supported.
• Refer to Table 1-64 TAPI Commands on page 1-826 for a list of supported TAPI commands.
Table 1-64 TAPI Commands
lineAddProvider
lineAnswer
lineConfigDialog lineBlindTransfer
lineGetAddressCaps lineCompleteCall
lineGetDevCaps lineCompleteTransfer
lineGetDevConfig lineDevSpecific
lineGetIcon lineDial
lineGetID lineDrop
lineInitializeEx lineForward
lineNegotiateAPIVersion lineHold
lineNegotiateExtVersion lineMakeCall
lineRemoveProvider linePark
lineSetDevConfig linePickup
lineShutdown linePrepareAddToConference
lineClose lineRedirect
lineDeallocateCall lineRemoveFromConference
lineGetAddressStatus lineSetupConference
lineGetCallInfo lineSetupTransfer
lineGetCallStatus lineSwapHold
lineGetLineDevStatus lineUncompleteCall
lineOpen lineUnhold
lineSetAppSpecific lineUnpark
lineSetLineDevStatus lineGatherDigits
lineSetMediaMode lineGenerateDigits
SL2100 ISSUE 1.0
1-826
TAPI Compatibility
T