NEC SL2100 - Table 1-63 Trunk Application

Terminal Type Applied/Not Applied Remarks
IP7[ ]-8IPLD-C1 Y
DT400 Series Y
DT800 Series Y
Y = Applied, N = Not Applied
Table 1-63 Trunk Application
Trunk Type Applied/Not Applied Remarks
Analog Line Y *1
ISDN (BRI) Line Y *1
ISDN (PRI) Line Y *1
SIP Line Y *1
H.323 Line Y *1
Y = Applied, N = Not Applied, *1 = Trunk is registered to Caller Log.
Related Features
None
Guide to Feature Programming
Program
No.
Program Name Input Data Default
15-07-01 Programmable Function Keys Line Key 1 ~ 32
0 ~ 99 (Normal Function Code
751 by default)
*00 ~ *99 (Appearance Function
Code) (Service Code 752 by de-
fault)
*35 - System Call History
Refer to the Program-
ming Manual for the
default values.
Related System Data:
Program
No.
Program Name Input Data Default
15-02-34 Multiline Telephone Basic Data Setup - Call Reg-
ister Mode
0 = Trunk Mode
1 = Extension/Trunk Mode
0
15-07-01 Programmable Function Keys Line Key 1 ~ 32
0 ~ 99 (Normal Function Code
751 by default)
*00 ~ *99 (Appearance Function
Code) (Service Code 752 by de-
fault)
*35 - System Call History
Refer to the Program-
ming Manual for the
default values.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-811
S