Flash
Description
Flash allows an extension user to access certain CO and PBX features by interrupting the trunk loop
current. Flash lets an extension user take full advantage of whatever features the connected Telco or
PBX offers. You must set the Flash parameters for compatibility with the connected Telco or PBX.
Conditions
The system does not provide a ground flash.
Default Settings
Enabled
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Drop Key
PBX Compatibility/Behind PBX
InMail
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-42 Service Code Setup (for Service Access) - Flash
on Trunk lines
0~9,
, # Maximum of 8 digit #3
14-02-03 Analog Trunk Data Setup - Flash Type 0 = Open Loop Flash
1 = Ground
0
14-02-04 Analog Trunk Data Setup - Hooking Type 0 = Timed Flash (Hooking)
1 = Disconnect (Cut)
0
14-04-01 Behind PBX Setup - Type of Connection 0 = Stand Alone (Trunk)
1 = Behind PBX (PBX)
3 = CTX assume 9
0
SL2100 ISSUE 1.0
1-306
Flash
F
To Next Page
Loading...
