EasyManua.ls Logo

NEC SL2100 - Figure 1-26 Example - SIP Terminal

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SIP Terminal Example
VoIPDB :
Subnet Mask :
Default Gateway :
192.168.1.20
255.255.255.0
192.168.1.254
SIP Softphone
SIP Terminal
VoIPDB
Switch/Hub
Figure 1-26 Example - SIP Terminal
The following menu items require programming in your SIP IP Terminal (consult SIP Terminal vendor
specific documentation):
Program/
Item No.
Description/Selection Default Assigned Data Comments
1 IP Address 0.0.0.0 Enter a Static IP Address for the SIP Terminal.
2 Subnet Mask 0.0.0.0 Enter the Subnet Mask Address.
3 Default Gateway 0.0.0.0 Enter the Default Gateway address.
4 VoIPDB Address 0.0.0.0 Enter the VoIPDB IP Address.
This information can be located in PRG
10-12-09 SL2100 Network Setup IP Address.
5 Extension Number 0 Assign the SIP Terminal extension. This infor-
mation must match PRG 11-02-01 Extension
Numbering.
Operation
None
SL2100
ISSUE 1.0
1-508
IP Single Line Terminal (SIP)
I

Table of Contents

Other manuals for NEC SL2100

Related product manuals