NEC SL2100 - Table 1-29 Recording Your Paging Message; Table 1-30 Setting the Call Handling Options

Program
No.
Program Name Input Data Default
47-02-18 InMail Station Mailbox Options - Paging Option 0 = RNA
1 = Immediately
0
Setting Up Park and Page for a Group Mailbox:
Program
No.
Program Name Input Data Default
47-06-07 Group Mailbox Subscriber Options - Auto At-
tendant Direct to Voice Mail
0 = No (Disabled)
1 = Yes (Enabled)
0
47-06-12 Group Mailbox Subscriber Options - Next Call
Routing Mailbox
0 ~ 32
(0 = Undefined)
1
(Call Routing Mailbox
01)
By default, Call Routing
Mailbox numbers are
01 ~ 32.
47-06-15 Group Mailbox Subscriber Options - Enable Pag-
ing
0 = No
1 = Yes
0
47-06-16 Group Mailbox Subscriber Options - Paging Op-
tion
0 = RNA
1 = Immediate
0
Operation
To record your paging message refer to Table 1-29 Recording Your Paging Message on page 1-464.
Table 1-29 Recording Your Paging Message
Recording Your Paging Message In these Instructions: [Telephone Softkey]
To record your Paging Message:
1. Log onto your Subscriber Mailbox.
2. [More> + More> + Page] Select Paging Message.
• Alternately dial PG (74).
3. Do one of the following:
a. [Lstn] Select to listen to the current Paging Message (if any).
• Alternately dial L (5).
# Exit the listen mode.
b. [Rec] Select to record the Paging Message.
• Alternately dial R (7).
[Pause] Select to pause recording.
• Alternately dial
*
.
[Resume] Select to resume recording (if paused).
• Alternately dial
*
.
[Cncl] Select to erase the recording.
• Alternately dial E (3).
[Done] Select to confirm the recording and exit the recording mode.
• Alternately dial #.
c. [Del] Select to erase the Paging Message.
• Alternately dial E (3).
d. [Back] Select to go back to the Mailbox Main Menu.
• Alternately dial #.
To set your call handling options refer to Table 1-30 Setting the Call Handling Options on page 1-465.
SL2100
ISSUE 1.0
1-464
InMail Park and Page
I