NEC SL2100 - Page 128

4. Press Speaker key or hang up.
The Call Forwarding Programmable Function key turns off.
To set Call Forward - Both Ring at a forwarding station:
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - Both Ring Service Code (default: 745).
- OR -
At the Multiline Terminal only, press the Call Forwarding Programmable Function keys. (PRG
15-07-01, 14 or SC 751, Key Code 14)
3. Dial 1 (Set).
4. Dial the destination extension number.
5. Press Speaker key or hang up.
The Call Forwarding Programmable Function key turns on.
To cancel Call Forward - Both Ring at a forwarding station:
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - Both Ring Service Code (default: 745).
- OR -
At the Multiline Terminal only, press the Call Forwarding Programmable Function keys. (PRG
15-07-01, 14 or SC 751, Key Code 14)
3. Dial 0 (Cancel).
4. Press Speaker key or hang up.
The Call Forwarding Programmable Function key turns off.
To set Call Forward - Follow Me from the destination station:
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - Follow Me Service Code (default: 746).
- OR -
At the Multiline Terminal only, press the Call Forwarding Programmable Function keys. (PRG
15-07-01, 10 or SC 751, Key Code 15)
3. Dial 1 (Set).
4. Dial the station number to be forwarded and then the destination number.
5. Press Speaker key or hang up.
The Call Forwarding Programmable Function key goes on.
To cancel Call Forward - Follow Me from the destination station:
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - Follow Me Service Code (default: 746).
- OR -
At the Multiline Terminal only, press the Call Forwarding Programmable Function keys. (PRG
15-07-01, 10 or SC 751, Key Code 15)
3. Dial 0 (Cancel).
4. Dial the station number, which is forwarded, or 0 to cancel all extensions.
SL2100
ISSUE 1.0
1-114
Call Forwarding
C