NEC SL2100 - Page 130

2. Dial the Call Forward - Immediate Service Code (default: 741).
3. Dial 0 (Cancel).
4. Press Speaker key or hang up.
To set Call Forward - Busy/No Answer using a Virtual Extension:
1. Press the idle Virtual Extension key.
2. Dial the Call Forward - Busy/No Answer Service Code (Default: 744).
3. Dial 1 (Set).
4. Dial the destination extension or off-premise number.
5. Press Speaker key or hang up.
Refer to Call Forwarding on page 1-108.
To cancel Call Forward - Busy/No Answer using a Virtual Extension:
1. Press the idle Virtual Extension key.
2. Dial the Call Forward - Busy/No Answer Service Code (default: 744).
3. Dial 0 (Cancel).
4. Press Speaker key or hang up.
To set Call Forward - All (Split):
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - Immediate Service Code (default: 682).
3. Dial 1 (Set).
4. Dial 1 (INT) to set the destination for Internal calls or 2 (EXT) to set the destination for External
calls.
5. Dial the destination extension or off-premise number.
6. Press Speaker key or hang up.
Refer to Call Forwarding on page 1-108.
To cancel Call Forward - All (Split) at a forwarding station:
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - All Split Service Code (default: 682).
3. Dial 0 (Cancel).
4. Dial 0 to cancel all Call Forward All Split destinations, 1 (INT) to cancel the destination for Internal
calls, or 2 (EXT) to cancel the destination for External calls.
5. Press Speaker key or hang up.
To set Call Forward - Busy (Split):
1. Pick up the handset or press Speaker key.
2. Dial the Call Forward - Busy Split Service Code (default: 683)
3. Dial 1 (Set).
4. Dial 1 (INT) to set the destination for Internal calls or 2 (EXT) to set the destination for External
calls.
5. Dial the destination extension or off-premise number.
SL2100
ISSUE 1.0
1-116
Call Forwarding
C