Program
No.
Program Name Input Data Default
15-02-22 Multiline Telephone Basic Data Setup - Multiple
Incoming From Intercom and Trunk
0 = Disable
1 = Enable
1
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
0 = Normal
1 = Special
0
15-06-01 Trunk Access Map for Extensions - Trunk Ac-
cess Map Number
001 ~ 128 1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
15-13-01 Loop Keys - Outgoing Option 0 ~ 50
(0 = Assigns the Loop Key for
ARS, 1 ~ 50 = Assigns the Loop
Key to the trunk group specified)
0: Programming Func-
tion Key No. = 01 ~ 32
15-13-02 Loop Keys - Incoming Option 0 ~ 50
(0 = Assigns the Loop Key to all
trunk groups,
1 ~ 50 = Assigns the Loop key to
the trunk group specified)
0: Programming Func-
tion Key No. = 01 ~ 32
15-28-01 Trunk Incoming Ring Tone of Extension Setup -
Trunk Incoming Ring Tone
0 ~ 8
0 = Trunk incoming ring tone (2W
Digital/IP Multiline Terminal)
1 = High (2W Digital/IP Multiline
Terminal)
2 = Middle (2W Digital/IP Multi-
line Terminal)
3 = Low (2W Digital/IP Multiline
Terminal)
4 = Melody1 (2W Digital/IP Multi-
line Terminal)
5 = Melody2 (2W Digital/IP Multi-
line Terminal)
6 = Melody3 (2W Digital/IP Multi-
line Terminal)
7 = Melody4 (2W Digital/IP Multi-
line Terminal)
8 = Melody5 (2W Digital/IP Multi-
line Terminal)
0
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
0 = Disable (Off)
1 = Enable (On)
1
20-02-15 System Options for Multiline Telephones - Caller
ID Display Mode
0 = Name and Number (Both)
1 = Name
2 = Number
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-10-07 Class of Service Options (Answer Service) - Au-
tomatic Off-Hook Answer
0 = Off
1 = On
COS 01 ~ 15 = 0
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
0 = Off
1 = On
COS 01 ~ 15 = 1
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
0 = Off
1 = On
COS 01 ~ 15 = 0
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0 = Disable (Off)
1 = Enable (On)
0
21-01-16 System Options for Outgoing Calls - Supervise
Dial Detection Timer
0 ~ 64800 seconds 20
21-01-17 System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
Digits 1 ~ 9 4
ISSUE 1.0 SL2100
Features and Specifications Manual 1-171
C
To Next Page
Loading...
