NEC SL2100 - Page 187

Program
No.
Program Name Input Data Default
82-08-01
(MF Level)
Sidetone Volume Setup - Sidetone Volume Input Data ( Digital Sidetone Lev-
el : Analog Sidetone Level )
0 ( - 54 dB : - 54 dB )
1 ( - 48 dB : - 54 dB )
2 ( - 42 dB : - 54 dB )
3 ( - 36 dB : - 48 dB )
4 ( - 30 dB : - 42 dB )
5 ( - 24 dB : - 36 dB )
6 ( - 18 dB : - 30 dB )
7 ( - 12 dB : - 24 dB )
8 ( - 12 dB : - 18 dB )
9 ( - 12 dB : - 12 dB )
9
Operation
To answer an incoming trunk call:
1. Lift the handset.
To use Universal Answer to answer a call ringing over the Paging system:
1. Go off-hook.
Depending on system programming, this may answer the call and you can skip step 2.
2. Dial #9.
If you hear error tone, your extension Class of Service prevents Universal Answer.
To listen to the incoming trunk ring choices:
1. Press Speaker key.
2. Dial 711 + 2.
3. Select the ringing (1~8) you want to check.
4. Go back to step 3 to listen to additional choices or press Speaker key to hang up.
To change the ringing of your incoming trunk:
1. Press Speaker key.
2. Dial 720 + 2.
3. Select the ringing (1~8).
4. Press Speaker key to hang up.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-173
C