NEC SL2100 - Page 191

Program
No.
Program Name Input Data Default
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
1
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
0 = Normal
1 = Special
0
15-06-01 Trunk Access Map for Extensions - Trunk Ac-
cess Map Number
001 ~ 128 1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
15-13-01 Loop Keys - Outgoing Option 0 ~ 50
(0 = Assigns the Loop Key for
ARS, 1 ~ 50 = Assigns the Loop
Key to the trunk group specified)
0: Programming Func-
tion Key No. = 01 ~ 32
15-13-02 Loop Keys - Incoming Option 0 ~ 50
(0 = Assigns the Loop Key to all
trunk groups,
1 ~ 50 = Assigns the Loop key to
the trunk group specified)
0: Programming Func-
tion Key No. = 01 ~ 32
20-02-06 System Options for Multiline Telephones - Prese-
lection Time
0 ~ 64800 seconds 5 (seconds)
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
0 = Disable (Off)
1 = Enable (On)
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-07-12 Class of Service Options (Administrator Level) -
Trunk Port Disable
0 = Off
1 = On
COS1 ~ 14/COS15 = 1
20-08-02 Class of Service Options (Outgoing Call Service)
- Trunk Outgoing Calls
0 = Off
1 = On
COS 01 ~ 15 = 1
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
0 = Off
1 = On
COS 01 ~ 15 = 1
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0 = Disable (Off)
1 = Enable (On)
0
21-01-16 System Options for Outgoing Calls - Supervise
Dial Detection Timer
0 ~ 64800 seconds 20
21-01-17 System Options for Outgoing Calls - Restriction
Digit in Outgoing Disable on Incoming Line
Digits 1 ~ 9 4
21-02-01 Trunk Group Routing for Extensions - Route Ta-
ble Number
0 ~ 50
0 = No Setting (Calls will not
route.)
1
21-15-01 Individual Trunk Group Routing for Extensions -
Route Table Number
0 ~ 50
0 = No Setting (Calls will not
route.)
0
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
0 ~ 64800 seconds 1800
24-02-10 System Options for Transfer - Disconnect Trunk-
to-Trunk
0 ~ 64800 seconds 0
ISSUE 1.0 SL2100
Features and Specifications Manual 1-177
C