Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-10-17 Service Code Setup (for System Administrator) -
Dial Block by Supervisor
0~9,
, # Maximum of 8 digit 601
11-11-33 Service Code Setup (for Setup/Entry Operation) -
Dial Block
0~9,
, # Maximum of 8 digit 600
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-08 Class of Service Options (Outgoing Call Service)
- Toll Restriction Dial Block
0 = Off
1 = On
COS 01 ~ 15 = 1
21-07-01 Toll Restriction Override Password Setup - Pass-
word
Four Digits (Fixed) No Setting
21-09-01 Dial Block Setup - Toll Restriction Class With Di-
al Block
1 ~ 15 15
21-09-02 Dial Block Setup - Supervisor Password 0 ~ 9,
, #
(4-digit fixed)
No Setting
21-10-01 Dial Block Restriction Class Per Extension - Toll
Restriction Class
0, 1 ~ 15
(0 = No Setting)
0
90-19-01 Dial Block Release - Delete IP Telephone [Release ?] : Dial 1 + press Hold
(Press Hold only to cancel.)
-
Operation
To set Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 600 (default).
3. Dial the 4-digit Dial Block Code (as set in programming).
4. Dial 1.
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
To release Dial Block:
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 600.
3. Dial the 4-digit Dial Block code.
4. Dial 0.
Confirmation tone is heard.
5. Press Speaker key or replace the handset to hang up.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-203
C
To Next Page
Loading...
