NEC SL2100 - Page 233

Related Features
Caller ID
Conference
Programmable Function Keys
Guide to Feature Programming
Program
No.
Program Name Input Data Default
14-01-19 Basic Trunk Data Setup - Privacy Mode Toggle
Option
0 = Disable (No)
1 = Enable (Yes)
0
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-13-09 Class of Service Options (Supplementary Serv-
ice) - Privacy Release
0 = Off
1 = On
COS 01 ~ 15 = 1
20-13-17 Class of Service Options (Supplementary Serv-
ice) - Barge-in Tone/Display (Intrusion Tone)
0 = Off
1 = On
COS 01 ~ 15 = 1
31-01-04 System Options for Internal/External Paging -
Privacy Release Time
0 ~ 64800 seconds 90 seconds
Operation
To join a Voice Call Conference (if invited):
1. After Conference request, press indicated line key.
A Conf indication is displayed on both telephones.
A trunk with privacy release or Voice Call Conference blinks.
To exit a Voice Call Conference without affecting the other parties:
1. Press Speaker key to hang up.
To toggle between Private and Non-Private mode:
1. Press the Meet-Me Conference key (PRG 15-07-01, SC 751: 32).
- OR -
Press the Trunk Line key. (This toggles from Non-Private to Private. To go back to Non-Private,
the Meet-Me Conference key above must be pressed.)
ISSUE 1.0
SL2100
Features and Specifications Manual 1-219
C