NEC SL2100 - Page 235

Related Features
Pulse to Tone Conversion
Guide to Feature Programming
Program
No.
Program Name Input Data Default
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
0 = Normal
1 = Special
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
0 = Off
1 = On
COS 01 ~ 15 = 1
21-04-01 Toll Restriction Class for Extensions - Restric-
tion Class
1 ~ 15 = Toll Class 1 ~ 15 2
21-05-04 Toll Restriction Class - Maximum Number of Dig-
its Table Assignment
0 = No Table Applied
1 ~ 4 = Tables 1 ~ 4 ( Defined in
PRG 21-06-03)
Class No1 ~ 2, 6 ~ 15 :
0
Class No3 : 1
Class No4 : 2
Class No5 : 3
21-06-03 Toll Restriction Table Data Setup - Maximum
Number of Digits Table Assignment
Tables 1~4 = 30
Operation
To use Continued Dialing:
1. Place an intercom or trunk call.
2. Continue dialing after the call connects.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-221
C