Program
No.
Program Name Input Data Default
22-07-01 * DIL Assignment - Number of Transferring Desti-
nation
Maximum of 8 digits (0 ~ 9,
, #) No Setting
22-01-04 System Options for Incoming Calls - DIL No An-
swer Recall Time
0 ~ 64800 seconds
0 = No Overflow
0
22-08-01 DIL/IRG No Answer Destination - Incoming Ring
Group Number
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
COS 01 ~ 15 = 1
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
0 = Off
1 = On
COS 01 ~ 15 = 0
22-04-01 Incoming Extension Ring Group Assignment -
Extension Number
Maximum eight Digits Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
Operation
To answer a call on your Direct Inward Line:
1. Lift the handset.
2. Press the flashing line key for DIL on the Multiline Terminal.
• Pressing the flashing line key puts the first call on hold and answers the second incoming call.
This can be repeated until all incoming calls are answered.
• If you have Ringing Line Preference, lift the handset to answer the call.
• If you do not answer the call, it may ring other extensions (i.e., the DIL No Answer Ring Group).
To place a call on your Direct Inward Line:
1. Lift the handset.
2. At the Multiline Terminal, press the line key for DIL.
- OR -
Dial #0 and the DIL trunk number (e.g., 05).
- OR -
Dial 704 and the DIL trunk group number (e.g., 05).
- OR -
Dial 0 for Trunk Group Access.
3. Dial the number.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-261
D
To Next Page
Loading...
