Related Features
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Answering
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Long Conversation Cutoff
Tandem T
runking (Unsupervised Conference)
Transfer
Voice Response System (VRS)
Guide to Feature Programming
Program
No.
Program Name Input Data Default
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
0 = Common use for both analog
extensions and trunks
1 = Use for analog extensions
(DTMF Receivers)
2 = Use for analog trunks (DTMF
receivers/Dial tone detection/
Caller ID detection)
Resource 01 ~ 140 = 0
1
1-09-02 Trunk Access Code - 2nd Trunk Route Access
Code
Dial (Up to four digits) No Setting
14-01-02 Basic Trunk Data Setup - Transmit Level 1 ~ 63
(- 15.5 dB ~ + 15.5 dB in 0.5 dB
intervals)
32 (0 dB)
14-01-03 Basic Trunk Data Setup - Receive Level 1 ~ 63
(- 15.5 dB ~ + 15.5 dB in 0.5 dB
intervals)
32 (0 dB)
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer
0 = Disable (No)
1 = Enable (Yes)
1
20-01-05 System Options -
DTMF Receive Active Time 0 ~ 64800 seconds 10
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
COS 01 ~ 15 = 1
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
0 = Off
1 = On
COS 01 ~ 15 = 0
20-14-01 Class of Service Options for DISA/E&M - First
Digit Absorption (Delete First Digit Dialed)
0 = Off
1 = On
COS 01 ~ 15 = 0
20-14-02 Class of Service Options for DISA/E&M - Trunk
Group Routing/ARS Access
0 = Off
1 = On
COS 01 ~ 15 = 0
20-14-03 Class of Service Options for DISA/E&M - Trunk
Group Access
0 = Off
1 = On
COS 01 ~ 15 = 1
20-14-04 Class of Service Options for DISA/E&M - Outgo-
ing System Speed Dial
0 = Off
1 = On
COS 01 ~ 15 = 0
ISSUE 1.0 SL2100
Features and Specifications Manual 1-265
D