Program
No.
Program Name Input Data Default
25-12-01 Alternate Trunk Group Routing for DISA - Route
T
able Number
0 ~ 50
(0 = No Setting)
1
25-15-01 DISA Transfer Target Setup - DISA Transfer Tar-
get Area At Wrong Dial
Speed Dial bin number 0 ~ 999 999
25-15-02 DISA Transfer Target Setup - DISA Transfer Tar-
get Area At No Answer or Busy
Speed Dial bin number 0 ~ 999 999
Trunk Continue/Disconnect Codes
Program
No.
Program Name Input Data Default
14-01-25 Basic Trunk Data Setup - Continued/Discontin-
ued T
runk-to-Trunk Conversation
0 = Disable (No)
1 = Enable (Yes)
0
22-07-01 DIL Assignment - Number of Transferring Desti-
nation
Maximum of 8 digits (0 ~ 9,
, #) No Setting
20-28-01 Trunk to Trunk Conversation - Conversation
Continue Code
0 ~ 9,
, #
(Set for one digit only)
No Setting
20-28-02 Trunk to Trunk Conversation - Conversation Dis-
connect Code
0 ~ 9,
, #
(Set for one digit only)
No Setting
20-28-03 Trunk to Trunk Conversation - Conversation
Continue T
ime
0 ~ 64800 seconds 0
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
0 ~ 64800 seconds 1800
24-02-10 System Options for Transfer - Disconnect Trunk-
to-Trunk
0 ~ 64800 seconds 0
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
0 ~ 64800 seconds 1800
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
0 ~ 64800 seconds 30
Operation
To place a DISA call into the system:
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension.
- OR -
Dial 0 for Trunk Group Routing or ARS.
- OR -
Dial Alternate Trunk Route Access Code (if enabled).
- OR -
Dial 704 + a trunk group number (1~50) for an outside call.
- OR -
Dial #0 + a trunk number (001~128) for an outside call.
- OR -
Dial #2 + System Speed Dialing bin number.
SL2100 ISSUE 1.0
1-268
Direct Inward System Access (DISA)
D
To Next Page
Loading...
