NEC SL2100 - Page 288

Program
No.
Program Name Input Data Default
30-05-21 DSS Console Lamp Table - Voice Mail Message
Indication
0 ~ 7 (Lamp Pattern Data) 3
Table 1-14 Default Value for PRG 30-03-01
Conversion Table Received Number Terget Number
DSS001 01 (DSS Key) 101
DSS002 01 (DSS Key) 102
: : :
DSS059 01 (DSS Key) 159
DSS060 01 (DSS Key) 160
DSS061 - 114 00 (Blank) No Setting
Operation
Calling an extension from your DSS Console:
1. Press the DSS Console key.
If the call voice-announces, you can make it ring by dialing 1.
If you do not have Handsfree, you must lift the handset to speak.
Extension Busy Lamp Field
When the DSS key is...
On
Off
Flashing Fast
The assigned extension is...
Busy on a call
Idle
In Do Not Disturb
Answering a trunk call from your DSS Console:
1. Press the flashing DSS Console key assigned to the trunk.
If you do not have Handsfree, you must lift the handset to speak.
Transferring a call using your DSS Console (Needs to set at 30-03):
1. Place or answer the call.
2. Press Transfer key to transfer the call.
3. Press the DSS key for the extension to receive the transfer.
4. (Optional) Announce the call.
If called party does not want the call, press the flashing line key to retrieve it.
SL2100 ISSUE 1.0
1-274
Direct Station Selection (DSS) Console
D