NEC SL2100 - Page 298

Program
No.
Program Name Input Data Default
22-03-01 Trunk Ring Tone Range - Ring Tone Pattern 0 = Tone 1
1 = Tone 2
2 = Tone 3
3 = Tone 4
4 = Melody 1 (2W Digital/IP Mul-
tiline Terminal)
5 = Melody 2 (2W Digital/IP Mul-
tiline Terminal)
6 = Melody 3 (2W Digital/IP Mul-
tiline Terminal)
7 = Melody 4 (2W Digital/IP Mul-
tiline Terminal)
8 = Melody 5 (2W Digital/IP Mul-
tiline Terminal)
9 = Tone 5 (2W Digital/IP Multi-
line Terminal)
10 = Tone 6 (2W Digital/IP Multi-
line Terminal)
11 = Tone 7 (2W Digital/IP Multi-
line Terminal)
12 = Tone 8 (2W Digital/IP Multi-
line Terminal)
0
80-01-01 Service Tone Setup - Repeat Count 0 ~ 255 (0 = Endless) Refer to the Program-
ming Manual for the
default values.
80-01-02 Service Tone Setup - Tone 6, Internal Busy Tone 0~33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
80-01-02
(06)
Service Tone Setup - Basic Tone Number 0~33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
80-01-02 Service Tone Setup - Tone 14, Intercom Ring-
back Tone
0~33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
80-01-02
(14)
Service Tone Setup - Basic Tone Number 0~33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
80-01-02 Service Tone Setup - Tone 39, Special Audible
Ring Busy Tone
0~33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
80-01-02
(39)
Service Tone Setup - Basic Tone Number 0~33
(0 = No Tone)
(33 = Default Time Slot)
Refer to Programming
Manual.
Table 1-16 Basic Tone Table - Tone 06
Tone 06
Unit Basic Tone Duration Gain Level
1 0 - No Tone 400ms 32
2 1 - 420Hz, -13dB 400ms 32
3 0 - No Tone 0ms
4 0 - No Tone 0ms
5 0 - No Tone 0ms
6 0 - No Tone 0ms
7 0 - No Tone 0ms
8 0 - No Tone 0ms
SL2100 ISSUE 1.0
1-284
Distinctive Ringing, Tones and Flash Patterns
D