NEC SL2100 - Page 311

Program
No.
Program Name Input Data Default
15-02-05 Multiline Telephone Basic Data Setup - Transfer
Key Operation Mode
0 = Transfer
1 = Serial Call (call back)
2 = Hook (Flash)
0
15-03-04 Single Line Telephone Basic Data Setup - Flash-
ing
0 = No
1 = Yes
1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
Operation
To use the Drop key from a Multiline Terminal with a CO/PBX call in progress:
1. Press the Function key programmed as a Drop key.
2. Receive the new CO/PBX dial tone.
3. Dial the desired number.
To use the Drop key feature from a Single Line Terminal with a CO/PBX call in
progress:
1. Hookflash.
2. Receive internal dial tone.
3. Dial the Service Code 660.
4. Receive the new CO/PBX dial tone.
5. Dial the desired number.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-297
D