NEC SL2100 - Page 335

Program
No.
Program Name Input Data Default
11-16-03 Single Digit Service Code Setup - Switching of
Voice/Signal Call
0 ~ 9,
*
, # Maximum of 1 digit 1
11-16-04 Single Digit Service Code Setup - Intercom Off-
Hook Signaling
0 ~ 9,
*
, # Maximum of 1 digit
*
11-16-05 Single Digit Service Code Setup - Camp-On 0 ~ 9,
*
, # Maximum of 1 digit #
11-16-06 Single Digit Service Code Setup - Do Not Dis-
turb/Call Forward override
0 ~ 9,
*
, # Maximum of 1 digit No Setting
11-16-07 Single Digit Service Code Setup - Message Wait-
ing
0 ~ 9,
*
, # Maximum of 1 digit No Setting
11-16-08 Single Digit Service Code Setup - Voice Over 0 ~ 9,
*
, # Maximum of 1 digit 6
11-16-09 Single Digit Service Code Setup - Access to
Voice Mail
0 ~ 9,
*
, # Maximum of 1 digit 8
11-16-10 Single Digit Service Code Setup - Department
Group
0 ~ 9,
*
, # Maximum of 1 digit No Setting
11-16-11 Single Digit Service Code Setup - Station Park
Hold
0 ~ 9,
*
, # Maximum of 1 digit No Setting
11-20-01 Dial Extension Analyze Table - Dial Dial (Up to eight digits : 0, 1 ~ 9,
#,
*
, @)
No Setting
11-20-02 Dial Extension Analyze Table - Type of Dials Type of Dials :
0 = Not used
1 = Service Code Access
2 = Extension Access
5 = Operator Access
6 = F-Route Access
0
Operation
None
ISSUE 1.0 SL2100
Features and Specifications Manual 1-321
F