NEC SL2100 - Page 351

Microphone Cutoff
Prime Line Selection
Guide to Feature Programming
Program
No.
Program Name Input Data Default
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
1
15-02-16 Multiline Telephone Basic Data Setup - Hands-
free Operation
0 = Disable (Off)
1 = Enable (On)
1
20-02-12 System Options for Multiline Telephones -
Forced Intercom Ring (ICM Call Type)
0 = Disable (Voice)
1 = Enable (Signal)
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-05 Class of Service Options (Incoming Call Service)
- Signal/Voice Call
0 = Off
1 = On
COS 01 ~ 15 = 1
Operation
To talk Handsfree:
1. Press Speaker, the Trunk Line, or the Virtual Extension key.
2. Place the call.
3. Speak toward the telephone when the called party answers.
To change a handset call into a Handsfree call:
1. Press Speaker key and hang up the handset.
2. Press Speaker key again to hang up.
To change a Handsfree call into a handset call:
1. Lift the handset.
To turn on/off Monitor:
1. Press Mute key or the Microphone Function key (PRG 15-07-01 or SC 751: 02) to turn on or off
the Microphone.
Monitor is off when Mute key LED is lit, the Microphone Function key is not lit (Off), or the handset
is lifted.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-337
H