NEC SL2100 - 4.6.2 Conference; 4.6.3 Call Forwarding; Follow Me

4. Dial
*
.
- OR -
Press your Account Code key (PRG 15-07 or SC 751: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for Single Line Terminals.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected
trunk.
2. Dial
*
.
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial
*
.
To enter an Account Code at a Single Line Terminal:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing on page 1-174 for
more information.
2. Dial
*
.
3. Enter Account Code (1~16 digits).
4. Dial
*
.
5. Dial number you want to call.
SL2100 ISSUE 1.0
1-24
Account Code Entry
A